Tires/Tubes

Smart Sam goes well on any terrain and even on the road it rolls effortlessly. It will roll over just about anything in the Double Defense version.

The Air-Liner is a high-quality polymer insert that replaces a portion of the air volume in the tire. This trait, combined with the shape, provides a tunable system that enhances your ride performance. The Air-Liner sidesteps the traditional compromise of stability vs. grip and allows your tires to remain stable, grippy, and controlled, even at low pressures. The Air-Liner is designed using a round cross-section with channels on the top and bottom. The top channel provides room for the tunable air chamber that sits directly beneath the tire tread. Upon impact, the corner edges of the channel flex first. This allows the tread to remain flexible, which increases traction without sacrificing impact resistance. The bottom channel allows for easy fine-tuning of the air chamber and allows for full compatibility of all valve core styles. The round cross-section shape mimics the natural shape of the tire and supports a greater contact area within the sidewalls of the tire casing. Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Protection: Both wheel and tire are protected by the Air-Liner insert. By cushioning impacts from within the tire, your expensive rim remains protected while eliminating flats caused by rim-strike impacts. - Control: The Air-Liner insert replaces air volume in the tire. The reduced air volume allows the tire to compress and rebound in a more controlled manner compared to standard tubeless systems. - Performance: Side-to-side tire stability is increased, yet the tread remains soft and grippy. This improves cornering, climbing, and braking performance. - Durability: This highly durable polymer material has been tested to a projected life of 2000 hours under normal riding, or 1 full hour of run-flat downhill use under a typical rider. - Air-Liner increases control, durability, performance, and protection of both tire and wheel. - Sold individually (single tire). Compatibility - Small: 1.9 – 2.25-inch wide tires - Medium: 2.25 – 2.5-inch wide tires - Large: 2.5 – 2.7-inch wide tires - X-Large: 2.7 – 4.0-inch wide tires

- ISO Diameter: 559 / 26" mtn - Tube Compound: Butyl - Valve: Standard Schrader - Valve Core: Removable - Valve Shaft: Smooth - Weight: 102g (1-1.25), 165g (1.5-1.75), 174g (1.9-2.125), 198g (2.1-2.3), 281g (2.4-2.75)

A collaboration between Vee Tire and SE Bikes, the Cub tire features a classic BMX tread pattern blended with that bold SE styling. The square V-knobbies have been strategically placed for ultimate grip and traction. - 20 x 2.0" - Wire bead

CST C1779 Tires. The CST Metropolitan Palm Bay tire features a unique tread that will keep your ride both smooth and stylish. - Perfect for everyday city riding - APL Puncture-resistance features .7mm layer of rubber between tread and casing - Tread pattern designed for reduced rolling resistance with consistent traction - Reflective sidewall for added safety - 22 TPI casing

- Butyl rubber - Removable valve core - Schrader valve - Wall thickness: 0.9mm

Grenade style Schrader Valve caps

Over a decade after its original release, the Nevegal gets a complete makeover that leaves no aspect of the tire unchanged. The tread pattern was updated for reduced rolling resistance and now features the new EN-DTC rubber compound. The casing benefits from the latest in material technology featuring the Advanced Trail Casing optimized for enduro racing and trail riding. - Superior flat resistance. The new ATC casing uses Kenda’s proprietary lightweight material K-Armor to increase puncture resistance by 174% over traditional aramid breakers - Responsive ride. EN-DTC dual tread rubber balances wear and grip, letting the knobs do the work of control and braking on the ground - Easy going. The new design and material offers 50% less rolling resistance than the original Nevegal - E-Bike ready. Certified to the ECE-R75 standards for e-bikes up to 50km/h in speed

Origin-8's Capiv-8er UL is a great choice for hardpack trails. This monster 26 x 3.5-inch wide tire has a smooth tread with small shoulder knobs for suction-cup like traction over smooth terrain and sweet all-around performance.

Vanhelga is a fat bike tire designed for trail riding in loose snow. It brings traction to a new level with dual-compound rubber, triple-siped shoulder knobs, and an open tread pattern that sheds snow. Vanhelga sheds snow and tracks flawlessly when the trail becomes soft and sloppy. - 120 TPI tubeless-ready casing - Ramped center lugs for rolling efficiency - Aggressively siping for grip - Shovel-design side lugs for predictable braking and cornering - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to premature casing wear and stud loss. - Always check with your rim manufacturer to verify rim & tire compatibility before assembly or use

- Repairs punctures up to 1/4 (6mm) - Optimized for temps down to 15degF (-9.4degC) - Synthetic later minimizes the risk of allergic reactions

The Horizon Road Plus tire brings supple plus-size traction and smooth riding characteristics beyond where the pavement ends. A smooth centerline and all-weather herringbone pattern with cornering channels make anything possible, just like the size. High-volume road provides deceivingly svelte performance on pavement, with resiliency that isn’t shaken by chasing confidants down dusty dirt roads. Sneak it into a cross bike, fit it into a road frame, the overall wheel diameter stays the same as a 700 x 30mm road tire. Ride it on tarmac, take it to the dirt as well. Creating a new riding experience, regardless of where your exploits lead you.

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

- 120tpi casing with Aramid TechBELT puncture protection - SmartEVO compound

The Current tire features a directional grippy tread pattern with good shape and tire width. It’s an affordable tire designed to make it easier for beginner riders to upgrade their bike and keep existing riders on their bikes. - Grippy tread pattern - Affordable high-pressure tire

- A trekking tire that can go anywhere you want it to take you - SmartGuard puncture protection layer offers the best puncture resistance of any tire - Endurance compound for super long tread life

- New tread design, improved compound and quality workmanship - The Schwalbe One sets a new benchmark in terms of quality and performance

Schwalbe tubes retain air pressure considerably longer than standard tubes. The quality and purity of the rubber mixture directly affects the quality of the tube.

- Butyl rubber - Economy tube - Removable valve core - Wall thickness: 0.9mm

- Valve Type: Presta - Valve Stem: Smooth - Valve Core: Non-Removable - Wall thickness: 0.9mm

- Urban/recreational tire with shallow, grooved tread for multiple conditions - 16 x 1.75

- Butyl rubber - Thorn-resistant - Economy tube - Schrader valve - Wall thickness: 3.7mm/1.7mm

- Anodized alloy construction - Fits standard Schrader valves

The MTB Alpha Bite is a classic mountain bike tire with large, widely spaced knobs. Excellent for use on hardpack, mud or loose sand.

- Valve Type: Presta - Valve Core: Removable - Butyl rubber - Wall Thickness: 4.3mm

- Valve Type: Presta - Valve Core: Non-Removable - Wall Thickness: 0.9mm - Flat Fold Width: 44mm (1.75-2.10), 65mm (2.50-3.0), 78mm (3.0-3.50)

- Smooth rolling center pattern with larger lugs on shoulders for corner traction and a square profile - ISO: 622 - Bead: Wire - TPI: 27

- Forged alloy construction - Fits Schrader valves

- Butyl rubber - Economy tube - Schrader valve - Removable valve core - Wall thickness: 0.9mm

- Valve type: Schrader - Valve core: Removable - Butyl rubber - Wall thickness: 0.9mm